| Type | LP1801 |
|---|---|
| Static head | 1,5 m |
| Output | 45 l/min |
| Nominal capacity | 30 W |
| Nominal voltage | 12 V |
| Nominal current | 2,5 A |
| Width | 334 mm |
| Height | 112 mm |
| Depth | 215 mm |
| Net weight | 1,2 kg |
| Pack size | 34,8 x 23 x 13,8 cm |
| Catalogue page | 450 |
The LILIE pipe connection system GrauGELB® 40 mm with double O-ring connects pipe, ball valve and sleeves not only quickly and easily, but also securely and tightly. O-ring 1 is fixed in the outer ring grooves of the pipe ends. O-ring 2 is located in the inner ring grooves of the valve body and the sleeves. When the pipe end is inserted, the two O-rings engage in the respective complementary groove on the other component. The double O-ring seals and simultaneously secures the connection. The connection stays flexible, so that it can be readjusted. In contrast to the commonly used gluing, the connection can be loosened and reassembled if necessary. Stress cracks are avoided as well. All of the connectors shown can also simply be plugged onto the pipe.
- Drinking water certified
- Manual emergency operation
- High discharge capacity
- Robust and durable
- Resistant to hot water
- Flexible
- Showers
- Sinks
- Washbasins
- Fresh/waste water tanks
- Especially for higher waste water tanks
The LILIE pumping system takes shower and waste water and pumps it automatically into the waste water tank, even if the tank is at a higher level. The emptying pump is equipped with an automatic level switch. As soon as this switch registers the ingress of water, the pump starts pumping until everything is emptied. Then the level switch switches the pump off again. An integrated non-return valve prevents the pumped water from flowing back.
Two dirt strainers protect the pump from heavy contamination and malfunctions. The collection tank holds up to 4 litres of liquid. It is made of plastic with a tightly closing transparent lid that can be opened and closed quickly and easily if necessary, e.g. for cleaning.
The housing has several inlets (19/25 mm and 30/40 mm) for the use of different inlet hoses. For the outlet, there is an extraction connection that can be used for several cross-sections (19/25 mm). A vent connection and a provided cable feed-through ensure easy activation and reliable operation.
Special drain/suction pump for:
Inlets: 19 mm, 19/25 mm, 30/40 mm | Outlet: 19/25 mm.
