| Nominal voltage | 12 V, 24 V |
|---|---|
| Width | 7,5 cm |
| Height | 2,5 cm |
| Depth | 4,7 cm |
| Net weight | 40 g |
| Pack size | 13,5 x 8 x 4,5 cm |
Votronic has been dedicated to providing a complete power supply on the road for over 35 years. Quality "Made in Germany" that you can rely on – be it in a caravan or motorhome (even off the beaten track), with the fire brigade or in rescue and special operations vehicles. Electronics developed by people for people – with a lot of experience and, above all, with sense and understanding.
The Solar Data Extender summarises the data from up to three solar controllers so that it can be shown on a single display. The familiar LCD display can still be used.
The Solar Data Extender is compatible with the following devices:
- Solar charge controllers in SR and MPP technology (from serial no. 14Vxx.xxxxx)
- Battery Charger type VBCS Triple
- LCD Solar Computer S (from serial no. 15V40.xxxxx)
- LCD Charge Control S
- VPC series with solar function
- Bluetooth Connector S-BC
Installation and connection
The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are summarised and made available via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there.
It is connected between the VOTRONIC solar charge controller and the solar display (e.g. LCD Solar Computer S) using the modular cable included in delivery. The IN1 connection must always be connected, as this is used to supply power to the device.
Details:
- Nominal voltage (supply via connected devices): 12 and 24 V
- Operating voltage range: 8 – 32 V
- Current consumption in standby, typical: 0.7 mA
- Current consumption during activity, typical: 10 mA
- Ambient conditions, humidity: max. 95% room humidity, non-condensing
Scope of delivery: 3 x control cable 6-pin 0.5 m long, operating instructions